Usually, these cosmetic packaging bottles will have these types. Most of here we can find in our daily commodities. Let's take a look at their characteristics.

    Blow molding bottle: The material is mostly PET. There are three types of caps: Qianqiu cap, flip cap, and screw cap. Blow molding is directly blown from the preform. The characteristic is that there is a bump on the bottom of the bottle, which is brighter under the light.

    Blow injection bottle: the material is mostly PP or PE. There are three kinds of caps: Qianqi cap, flip cap, and screw cap. Blow injection bottle is a process that combines blow injection and blow molding. It only needs one mold, and the characteristic is that there is a bonding line at the bottom of the bottle.

    All-plastic hose: all are made of PE material, and the hose is pulled out first and then cut, offset, silk-screened, and hot-stamped. According to the tube head, it is divided into round tube, flat tube, and oval tube. The price is round tube < ellipse < flat tube.

    The cream jar has an outer cover, an inner cover, an outer bottle, and an inner container. Can be divided into several categories:

    1. External acrylic, internal PP material, the cover is external acrylic and internal ABS with a layer of PP gasket

    2. Inner ceramic, PP outer anodized aluminum, cover outer anodized aluminum, PP inner ABS with a layer of PP gasket

    3. All PP bottles with a layer of PP gasket inside

    4. External ABS and internal PP, with a layer of PP gasket. Lotion bottle: consists of a cap, shoulder sleeve, lotion pump, and piston. Most of them have hoses inside. Most of them are made of acrylic outside and PP inside. The cover is made of acrylic outside and ABS inside.